Home » Products » Beneficiation Equipment » Three-cylinder Dryer

Three-cylinder Dryer

Three-cylinder Dryer

Three-cylinder Dryer is energy efficient product which was improved based on single tube rotary dryer. By the application of a number of enterprises, more than one industry, has achieved good results. Three rotary cylinder drying machin...

three cylinder dryer
Three-cylinder Dryer is energy efficient product which was improved based on single tube rotary dryer. By the application of a number of enterprises, more than one industry, has achieved good results. Three rotary cylinder drying machine improved the internal structure of the single cylinder drying machine, increase into the wet material pre drying and prolonged wet material drying time in the machine, plus sealing, thermal insulation and reasonable measures, so that the production capacity of the dryer than the orginal drum drying machine is improved. Its advanced technology, reasonable operating parameters, simple and feasible operation. It can be widely used in various sectors of the slag, coal, iron, slag and other admixture, construction of dry mixed mortar, sand and chemical industry, casting industry raw material drying.
Feature:
1, equipment investment is required to imported products 6/1.
2, to ensure the material with moisture is below 0.5%, dry mixed mortar and slag powder production line products.
3, the cylinder self insulation thermal efficiency can reach above 80% (the traditional single cylinder dryer thermal efficiency is only 35%) to improve the thermal efficiency of 45%.
4, fuel for coal, oil and gas. Can bake below 20mm block, granular and powdery materials
5, than the single cylinder drying machine to reduce the area around 50%, construction investment is reduced by about 50%, the power consumption is less than 60%.
6, the alloy steel plates than ordinary steel plate wear.
7, can according to the control requirements of final moisture index.
8, the exhaust temperature is low, the dust removal equipment used for a long time.
9, no need to size using the wheel rotating gear to rotate.
10, the discharge temperature is below 60 degrees, continuous production of packaging.
Technical Parameter:
Model KTH2.6×7m KTH3×7.6m KTH3.3×7.8m KTH3.6×8m
Diameter of Outer Cylinder (m) Φ2.6 Φ3 Φ3.3 Φ3.6
Length of Outer Cylinder (m) 7 7.6 7.8 8
Rotary Speed (r/min) 2~5 2~5 2~5 2~5
Dryer Stype Down Stream
Capacity (t/h) Slag Grit Slag Grit Slag Grit Slag Grit
25-33 27-35 43-52 45-55 60-68 65-73 80-90 85-95
Original Moisture (%) 13 10 13 10 13 10 13 10
Finished Moisture (%) 2 1 2 1 2 1 2 1
Highest Air Inlet Temperature (℃) ≤ 900
Utter Temperature of Waste Gas (℃) 70-80
Thermal Efficiency > 85%
Evaporation Intensity 60-80Kg H2O/m3. h
Standard Coal Consumption (kg/t) 6-8 6-8 6-8 5-8
Geared Motor Model XWDY11-8180-35 XWDY7.5-8175-35 XWDY11-8180-35 XWDY15-8195-47
Motor Power (kw) 2×11 4×7.5 4×11 4×15
Main Parts
Technical Parameter:
Name Model
Three Cylinder Rotary Dryer KTH2.6×7m KTH3×7.6m KTH3.3×7.8m KTH3.6×8m
Fluidized Bed Furnace KF2.7 KF3.18 KF3.69 KF4.25
Blast Blower Depends on Fluidized Bed Furnace
Dust Catcher HPC64-7 HPC64-2×5 HPC64-2×6 HPC64-2×8
Dedusting and Draught Fan Depends on Dust Catcher
Phone/Fax

Phone : 0086-21-60273583

Mail : info@pioneerer.com

Fax : 0086-21-60273582

Tag:

Address
No.12, Jinshun Road, Airport Industrial Zone, Pudong New District, Shanghai, China